x

Search

JA-14KR Control panel with built-in LAN communicator with radion module

Belongs to the core devices of the JA 10 system. This is the control panel for the protection of apartments, family houses and small businesses. It has a built-in LAN communicator and radio module.

Description

The JA-14KR control panel offers:

  • up to 32 wireless or bus devices
  • up to 16+3 user codes
  • up to 4 sections
  • up to 4 programmable PG outputs
  • 10 independent schedules
  • SMS and voice reports from the system to up to 8 users
  • 5 ARCs can be set
  • 5 selectable protocols for an ARC

The control panel has an integrated LAN communicator that enables data communication with an ARC and the JABLOTRON CLOUD, which enables full use of the MyJABLOTRON application.

Technical data

Type of installation Fixed installation
Nominal control panel voltage / frequency / fuse ~ 230 V / 50 Hz, T200 mA fuse 250 V 5 x 20 mm
~ 115 V / 60 Hz, T400 mA fuse 250 V 5 x 20 mm
Operation voltage range ~ 195 V ÷ 250 V
~ 110 V ÷ 120 V
Electric power / current Max 23 VA / 0.1 A
Protection class II.
Back-up battery 12 V; 2.6 Ah max. (lead-acid)
Low battery voltage (fault indication) ≤11 V
Maximum battery charging time 48 ÷ 72 hrs
BUS voltage / max. voltage ripple (red-black) 12.0 ÷ 13.8 V DC / ± 100 mV
Max. continuous consumption from the control panel BUS +RJ 400 mA permanently (1000 mA for 5 minutes)
@ 12 hours backup (2.6 Ah) LAN OFF: 125 mA – consumption of modules JA-190X (Y)
LAN ON: 85 mA – consumption of modules JA-190X (Y)
@ 24 hours backup (2.6 Ah) LAN OFF: 62 mA – consumption of modules JA-190X (Y)
LAN ON: 42 mA – consumption of modules JA-190X (Y)
Max. number of devices 32
Max. number of sections 4
Max. number of users 16+3
Max. number of PG outputs 4
Alarm connection Jablotron BUS – dedicated wiring
Wireless connection (with JA-111R) – unspecified wireless connection, Jablotron wireless protocol
Alarm system classification Security grade 2 / environmental class II
@ according to standards EN 50131-1, EN 50131-3, EN 50131-6, EN 50131-5-3, EN50131-10, EN 50136-1, EN 50136-2
@ environment indoor general
@ operational temperature / humidity -10°C to +40°C, relative humidity 75% no condensation
@ power Type A – primary supply with a charged backup battery
@ event history approx. 7 million latest events, incl. date and time
@ system reaction to communication loss Fault or tamper – according to the pre-set profile
@ BUS until 10 s
@ wireless communication in 2 hrs (report)
@ wireless communication in 20 min block system to be set
@ reaction to invalid code entry After 10 wrong code entries a tamper alarm is triggered and according to the selected profile it blocks all control devices for 10 min
@ ATS classification Supported ATS classes: SP2 – SP 5, DP2 – DP3
SPT: type Z
Operation type: Pass-Througth
Built-in LAN: SP2 – SP5 (with IP protocol)
JA-190Y SP2 – SP5 (with IP protocol)
JA-190X SP2 (with Contact ID protocol)
LAN + JA-190Y DP2 – DP3 (with IP protocol)LAN + JA-190X DP2 (with IP / CID protocol)
@ ATS transfering protocols JABLO IP, SIA IP, Contact ID, JABLO SMS
@ ATC protection against substitution and data protection Jablotron protocol: Proprietary AES encryption with minimum 128 bit key
ANSI SIA DC-09.2012 protocol with 128 bit AES encryption
LAN communicator Ethernet interface CAT 5 (RJ-45)
Dimensions 268 x 225 x 83 mm
Weight 1450 g
Basic parameters of the JA-111R module 868.1 MHz, < 25 mW, GFSK < 80 kHz
Radio emissions ETSI EN 300 220-2 (R module)
EMC EN 50130-4, EN 55022, ETSI EN 301 489-7, ETSI EN 301 489-3
Electric safety EN 60950-1
Operational conditions ERC REC 70-03, ERC DEC (98) 20
Certification body TREZOR TEST
Do you have any question? Write us

* Mandatory information