x

Search

JA-152KRY Control panel with radio module and 4G communicator LITE

Installation should be done by a trained technician with a valid certificate issued by an authorized Jablotron distributor.

The required settings and system parameters are programmed via MyCOMPANY. The setup is intuitive and very simple even for novice installers.

EAN: 8595614129909

  • Following item will be automatically added to this product: 1 pc
    BAT-3V7-5000

Description

The JA-152K control panel offers:

  • up to 31 wireless peripherals
  • up to 32 users
  • up to 4 sections
  • up to 2 programmable PG outputs
  • built-in acoustic indication (80 dB/m) of tamper, intrusion and fire alarm, which may be utilized as a wireless doorbell in combination with the JA-159J wireless doorbell button

Technical data

Installation type Fixed installation
Control panel power supply ~ 110 – 230 V/50 – 60 Hz, max. 0.28 A with F1.6 A/250 V fuse, security grade II
Electrical power / current Max. 23 VA / 0.1 A
Protection class II.
Back-up battery 3.7V, 5000 mAh, Li-Polymer
Low battery backup voltage (fault indication) ≤3.5V
Maximum battery recharge time (80% capacity) 72 h
Maximum number of sections 4
Maximum number of devices 31 devices + 31 remote controllers
Maximum number of users 32
Max. number of PG outputs 2
Alarm connections Wireless connection– unspecified wireless connection, Jablotron wireless protocol
Classification of Alarm device Security Grade 2 / Environment Grade II
@ According to standards EN50131-1, EN 50131-3, EN 50131-6, EN 50131-5-3, EN 50131-10, EN 50136-1, EN 50136-2
@ Environment Indoor general
@ operational temperature range / humidity range -10 °C to +40 °C / 75% RH without condensation
@ power supply Type A – primary mains power supply with a powered back-up battery.
@ event memory capacity approx. 7 million events, including sources and timestamps.
@ system reaction to loss of device communication Fault or Tamper – Dependent on selected profile
@ wireless communication within 2h (from last communication)
@ Wireless communication within 20min blocks section setting
@ system reaction to incorrect code entry Alarm after 10 wrong code entries, dependent on selected profile, the system will be locked for ten minutes.
@ ATS classification Supported ATS classes: SP2 – SP5,
SPT: type Z
Operation type: Pass-Through
GSM2201MD SP3 – SP5 (JABLO IP, ANSI SIA, DC-09)
@ ATS Alarm transmission protocols JABLO IP
@ ATC security against substitution and protection of information Jablotron protocols: proprietary AES encryption with a minimally 128 bit key ANSI SIA DC-09.2012 protocol with 128 bit AES encryption
Dimension 182 x 132 x 58 mm
Weight with battery / without battery 510 g/430 g
Based parameters of the JA 111R module 868.1 MHz, <25 mW, GFSK <80 kHz
Radio emissions ETSI EN 300 220-1,2
EMC EN 50130-4, EN 55032, ETSI EN 301 489-1, ETSI EN 301 489-3
Safety conformity EN IEC 62368-1
Conditions of operation ERC REC 70-03
Certification body TREZOR TEST (no. 3025)

Do you have any question? Write us

* Mandatory information