x

Search

AC-160-DIN Wireless multifunctional relay for DIN-rail installation

The wireless multifunctional relay is a component of the JABLOTRON 100+ system, but it can be equally installed as a stand-alone device without a link to a control panel.

EAN: 8595614112574

Description

It provides a switching contact relay with galvanic and safety isolation for switching 230 V/16 A power loads. The relay can respond to the status of control panel PG outputs or to the activation of devices of the JA-15x series with unidirectional communication, enrolled directly to the relay. The response can be selected from five modes – the default NATURAL function (extended copy), IMPULSE, STATUS CHANGE, SWITCH OFF and BLOCK. The relay also has a button for a direct manual status change. It allows you to update the firmware via a USB port. It is designed to be mounted on a DIN rail. It occupies one position in the system.

Technical data

Operational power 230 V/50 Hz
Own power consumption for 230 V AC (min/max) 0.5 W/1.7 W
Communication band 868.1 MHz, Jablotron protocol
Antenna Internal/optional external antenna type AN-868
MFR Contact rating - protection class II:
- Maximum switching voltage 250 V AC
- Resistive load (cosφ=1) max. 16 A
- Inductive, capacitive load (cosφ=0,4) max. 8 A
- Halogen lights max. 1000 W
- Minimum switching DC power 0.5 W
Recommended connection wires max. 2 x 1.5 mm2; max. 1 x 2.5 mm2
IP covering IP-20 (according to EN 65529), IP-40 (with a front panel)
Dimensions 18 x 90 x 64 mm
Weight 65 g
Operational temperature range -10 °C to + 40 °C, relative humidity 75% no condensation
Complies with ETSI EN 300 220-1, EN 50130-4, EN 55022, EN 60950-1, EN 50581
Can be operated to ERC REC 70-03
Do you have any question? Write us

* Mandatory information