Description
Description
When motion is sensed by the PIR detector, the MW detector is activated to confirm the triggering of the PIR. Only after receiving a confirmed alarm signal from the MW unit , the detector sends an alarm report to the control panel.
The detection characteristic may be optimised by using alternative lenses JS-7904 LONG HALLWAY, JS 7906 PET or JS-7901 CURTAIN.
It is addressable and occupies one position in the alarm.
Technical data
Technical data
| Power supply | Lithium battery type CR14500 (AA) 3.6 V/2.45 Ah Please note: Battery is not included |
|---|---|
| Nominal current | 21 μA |
| Maximal current | 38 μA |
| Battery low voltage | ≤ 2.6 V |
| Typical battery lifetime | approx. 2 years (DIP no. 3 to NORM) |
| Communication band | 868.1 MHz, Jablotron protocol |
| Communication range | approx. 300 m (open area) |
| Recommended installation height | 2.0 to 2.5 m above floor level |
| PIR detection angle/detection range | 110°/12 m (with basic lens) |
| MW detection angle/detection range | 24°/15 m (open area) |
| MW detection angle/detection range | 90°/15 m (sample room) |
| MW detection range/frequency | 9.35 GHz |
| Dimensions | 110 x 60 x 51 mm |
| Weight | 114 g |
| Classification | Security grade 2/Environmental class II |
| - according to | EN 50131-1, EN 50131-2-4, EN 50131-5-3 |
| - operational environment | Iindoor general |
| - operational temperature range | -10 °C to +40 °C |
| - average humidity | 75 % RH non condensing |
| - certification body | Trezor Test s,r.o. (no. 3025) |
| Complies with | ETSI EN 300 220, ETSI EN 300 440, EN 50130-4, EN 55022, EN 60950-1 |
| Can be operated according to | ERC REC 70-03 |
Related Products (1)
Related Products
Documents to download (1)