x

Menu

Product catalogue Log in
x

Search

Introduction Product catalogue Alarms JABLOTRON 100+ Control Panels JA-103K GSM Control panel with LAN communicator

Breadcrumb navigation
JA-103K GSM Control panel with LAN communicator

JA-103K GSM Control panel with LAN communicator

The core element of the JABLOTRON 100+ security system. A control panel for protecting family houses, offices and smaller companies. It can only be installed by a trained technician with a valid Jablotron Alarms certificate.

EAN: 8595614122580

Description

The required adjustments and sizing of the system are programmed through the F-Link software (from version 2.0.0).

The JA-103K control panel offers:

  • 50 wireless or bus devices
  • 50 users
  • 8 sections
  • 32 programmable PG outputs
  • 20 mutually independent calendar events
  • 8 user SMS and voice reports
  • 5 ARCs can be set
  • 5 selectable protocols for an ARC

The control panel has:

  • 1 terminal board for bus connection
  • 1 connector for a built-in radio module (JA-111R)
  • 1 connector for a GSM/GPRS communicator (JA-192Y)

The control panel also offers functions such as:

  • Maintenance
  • Day/night mode
  • Short departure response
  • Automatic setting
  • Advanced calendar features

The following products with the control panel ARE NOT COMPATIBLE:

  • JA-180A (wireless outdoor siren)
  • JA-154J (bi-directional remote control)
  • JA-190X (PSTN communicator module)

 The following products with the control panel ARE COMPATIBLE under certain conditions:

  • The JA-112E (keyboard) is compatible with FW LU61501 and higher
  • The JA-113E (keyboard) is compatible with FW LU61601 and higher
  • The JA-118N (PG Bus Output Module) is compatible with LY68003 and higher
    • FW version LY68002 and lower works only when the PG range is set in the F-Link up to a maximum value of 32
  • The JA-110I (section or PG bus indicator) is compatible only when the PG range is set in the F-Link up to a maximum value of 32

Technical data

Control panel power supply ~ 110 – 230 V/50 – 60 Hz, max. 0.28 A with fuse F1.6 A/250 V,
Protection class II
Back-up battery 12 V; 2.6 Ah (lead gel)
Maximum battery charging time 48 h
BUS voltage (red - black) 12.0 to 13.8 V
Maximum continuous current consumption from the control panel 1000 mA
Max. continuous current consumption for back-up 12 hours Without GSM communicator LAN – OFF: 115 mA
LAN – ON: 88 mA
With GSM communicator LAN – OFF: 80 mA
LAN – ON: 53 mA
Max. continuous current consumption for back-up 24 hours Without GSM communicator LAN – OFF: 21 mA
With GSM communicator LAN – OFF: 17 mA
Maximum number of devices 50
LAN communicator Ethernet interface, 10/100BASE
Dimensions 268 x 225 x 83 mm
Weight with/without AKU 1844 g/970 g
Reaction to invalid code entry Alarm after 10 wrong code entries
Event memory Approx. 7 million latest events, including date and time
Power supply unit Type A according to EN 50131-6
T 031 note: In case of a main power failure is the system backed up for 24 hours and at the same time is a failure report sent to the ARC.
GSM communicator (2G) 850 / 900 / 1800 / 1900 MHz
Classification Security grade 2 according to EN 50131-1
Operational environment Environmental class II (indoor general) according to EN 50131-1
Operational temperature range -10 °C to +40 °C
Average operational humidity 75 % RH, non-condensing
Complies with EN 50131-1 ed. 2+A1+A2, EN 50131-3, EN 50131-5-3+A1, EN 50131-6 ed. 2+A1, EN 50131-10, EN 50136-1, EN 50136-2, EN 50581
Radio operating frequency (with the JA 11xR module) 868.1 MHz
Radio emissions ETSI EN 300 220-1,-2 (module R), ETSI EN 301 419-1, ETSI EN 301 511 (GSM)
EMC EN 50130-4 ed. 2+A1, EN 55032 ed. 2, ETSI EN 301 489-7
Safety conformity EN 62368-1+A11
Caller identification (CLIP) ETSI EN 300 089
Operational conditions ERC REC 70-03
Certification body Trezor Test s.r.o. (no. 3025)
Do you have any question? Write us

* Mandatory information